Euro Truck

Chassis

• Tamyia TT-01 based Euro Semi Truck kits only.
• The kit must be built exactly as shown in the manual.
• No modifications of the chassis or any other kit parts allowed.
• Adding FOAM material to the kit bumper is allowed
• Plastic bearings may be upgraded to is ball bearings.
• All kit screws must be used. Screws may not be omitted to change the handling the truck.
• You must run all the kit parts including (but not limited to) the servo saver, springs, steering links, etc.
• Racers may use grease in the differentials. However, grease must not leak out of the vehicle.
• Differentials must work and cannot be "locked" mechanically or with putty or similar materials

Motor

• Must use kit supplied motor (item 54358 RS-540 Torque-Tuned Motor)
• Must use stock gearing
• The original motor bullet connectors must be used and the wires may not be shortened.

Electronic Speed Control (ESC)

• Must use kit supplied ESC.
• Reverse must be disabled in the ESC

Battery

• Any stick-pack type, hard round case 2S LiPo hardcase battery, Examples:
  • Reedy Wolf-Pack
  • Peak Racing Powermax
  • GARTPOT
• Max capacity of 6,000mAh 
• The battery connector may be replaced with Dean's style or XT60 connector
• Chassis may not be modified to fit the battery
• Kit supplied battery strap must be used

Body

• Tamiya Euro Truck bodies only (including the "Fat Fox")!
• The full body must be used. Body may not be modified to lower center of gravity or reduce weight.

Tires

• Tires: Must use kit supplied tires and wheels. (May use rear or front wheels/tires all the way around)
• Tires may be glued on the sidewalls ONLY. No glue may be applied to the treads.

Electronics

• Any servo and receiver may be used.